Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player
FUJIN SL-I  

If you want speed, no suspension and the possibility to mount a rack, then the Fujin SL-I is the best choice in the Fujin low-racer series. It combines the possibilitys of the Fujin-sport wiht the pedegree of the Fujin-SL-II.
Equiped wiht the SL-version of the Challenge vented seat combined wiht a ventisit for the best cooling on the long distance.

No more words are needed when you have read Walter's report!

 
WALTER'S REPORT



FUJIN SL 1
SEAT HEIGHT 33 cm / 13,0 ”
BOTTOM BRACKET HEIGHT ca. 56 cm / 22,0 ”
WHEELBASE 123 cm / 48,4”
SEAT ANGLE ADJUSTABLE 23° or 26°
WHEEL SIZE (F / R) 20” / 26” (ETRTO 406 / 559)
AVERAGE WEIGHT ca. 9,5 kg / 21 lbs
LIGHTWEIGHT VERSION around 9 kg / 19,8 lbs
TOTAL WEIGHT LIMIT 105 kg / 230 lbs rider and luggage
FRAME aluminium Challenge SL-tube
REAR STAYS aluminium Challenge SL-tube
FRONT FORK aluminium U6 for diskbrake
BAGGAGE CAPACITY max 25 kg / 55 lbs
DAY RACK aluminium,for two small sized bags (8 kg / 17,6 lbs max.)
VOYAGER RACK requires special recumbent bags
STEERING OPTIONS rigid-small / open cockpit / folding tiller
SEAT SYSTEMS Challenge aluminium vented SL-version
REAR SUSPENSION no
FRONT SUSPENSION no
FINISH powder coating 2-layers, 4 years warranty for the first owner)
WARRANTY ON FRAME 5 years on frame, for the first owner

LOWRACER INSPIRED DESIGN



CHALLENGE CNC STEM SYSTEM

The base of the System is a block which clamps to the top of the fork shaft, to fi t all of Challenge´s forks. Attaching to this with a smooth, play-free pivot system is the riser, which is CNC machined in a single piece. This is a highly stressed part and welds might compromise its strength.



CHALLENGE CHAIN IDLER

Challenge´s new idlers are made of injection-moulded carbon, and just like carbon in graphite form, the material has its own self-lubricating anti-friction properties built in. The idlers run on sealed bearings which can slide easily along their axles, allowing the idlers to adapt to the chain position as you change gear, minimising side loads. This reduces noise and friction even further.



CHALLENGE FRONT IDLER

Challenge front idlers also slides along there axles to adapt the ideal chainline.
The rings are made from a soft material as Your legs are moving close along this idler.

       
       
BACK TO PREVIOUS PAGE
BACK TO TOP